Automatic Card Dispenser RFID Access Control System Apply Smart Parking Lot

 Automatic Card Dispenser RFID Access Control System Apply Smart Parking Lot

Range of application:

 this module is a high efficient automatic machine automatically issuing/reclaiming card. which apply to card consumption system,such as smart parking lot,smart vending card system,card issuing/verification system.

Function:

◆ the equipment has the function that it will automatically detecting all photoelectric sensor ,checking out the card pre-empty and empty(with alarming signal and buzzer outputting and sensor, key-press and capturing input when it is power on, automatically pre-filling the card to required position.

◆During the process of automatically filling/dispensing/reclaiming, if the card is deformed,stained or failure of the equipment,the dispenser will automatically arranging the card and try to do five reciprocating motion,if still not success ,it will stop all action,waiting next command or manual intervention then sending the error signal to clients,at the same time the buzzer outputting alarming sound ,LED blinking with the buzzer.

◆When the card is pre-empty in the cylinder,the machine will output“LOWER”signal to clients, at the same time the buzzer outputting alarming sound, LED blinking with the buzzer.

◆When there is no card in the cylinder,the machine will output“EMPTY”signal to clients, at the same time the buzzer outputting alarming sound, LED blinking with the buzzer.

Features:

◆It adopts industrial MCU which has strong ability of anti- interference

◆With hardware watchdog,which  makes it has strong abiliYA of adapting and protection, also can detect when power-fail and low power

◆The TTL port adopt protection measures,ensuring the reliabiliYA of the signal and the circuit of the equipment

◆Weep the card by the friction of upper and lower wheel,thus it has strong adapting abiliYA to various warped cards

◆Two-motor alternating working design,ensure the equipment can work trouble-free for long term

◆Card empYA sensor use dual reflective photoelectric,heighten the efficiency of card detecting

◆The pre-filling function fastening the efficiency of card dispensation ,,alleviate the problem of vehicles queuing

◆Reserved sensor input realize the function that issuing card when a card arrived ,one car one card

◆The transmission round adopts special rubber ,good corrosion resistance and high temperature resistance

◆Material of the parts contacting or scrubbing  with the card is Stainless steel, will not rust

◆All production manufacture with mold, highly ensuring the product accuracy be Consistent with its qualiYA

◆Compact structure and electrostatic spraying surface treatment make the installation and transportation become convenient.

◆Support RS232,RS485 and electric level three control interface

◆Overlapping of card Cabinets design,maximum can up to 500 pieces(0.8mm)

◆Thickness of issued cards between 0.3mm―2.0mm is adjustable

◆With the function capture cards safely, prevent lose card maliciously